Download e-book for kindle: Applications of Texture Analysis by

ISBN-10: 0470408359

ISBN-13: 9780470408353

ISBN-10: 0470444215

ISBN-13: 9780470444214

This quantity comprises papers offered on the fifteenth overseas convention at the Texture of fabrics from June 1-5th, 2008 in Pittsburgh, PA. Chapters contain:

  • Thin movies
  • Texture at Non-Ambient stipulations
  • Novel Texture dimension ideas together with 3D
  • Complex Oxides
  • Interface Textures
  • Recrystallization Texture
  • Biomaterials
  • Texture results on harm Accumulation
  • Digital Microstructures

View info on Materials Processing and Texture: Ceramic Transactions, quantity 200.Content:
Chapter 1 the feel of skinny NiSi motion pictures and Its impact on Agglomeration (pages 1–9): ok. De Keyser, C. Detavernier, R. L. Van Meirhaeghe, J. Jordan?Sweet and C. Lavoie
Chapter 2 Epitaxial Substrates from Ni?Based Ternary Alloys with Cr and W (pages 11–22): D.P. Rodionov, I.V. Gervasyeva, Yu.V. Khlebnikova and V.A. Kazantsev
Chapter three dice Texture Formation in Ni?Pd and Ni?Pd?W Alloys for HTS Tapes (pages 23–34): I.V. Gervasyeva, D.P. Rodionov, Yu.V. Khlebnikova, G.A. Dosovitskii and A.R. Kaul
Chapter four Texture of quickly Solidified Cu skinny movies Studied via SEM EBSD and TEM (pages 35–45): R. Zhong, A. Kulovits, J.M.K. Wiezorek and J.P. Leonard
Chapter five regulate of Texture in Polycrystalline skinny movies Used as facts garage Media (pages 47–56): David E. Laughlin, Hua Yuan, En Yang and Chun Wang
Chapter 6 impacts of Processing Parameters on Microstructures and Microtextures of Au turn Chip Bonds in the course of Microelectronics Packaging (pages 57–62): P Yang, C?M Li, D?M Liu, M Hung, M Li and W?M Mao
Chapter 7 In Situ statement of Texture Evolution in Ti?10?2?3 (pages 65–72): Seema L. Raghunathan, Richard Dashwood, Martin Jackson, Sven Vogel and David Dye
Chapter eight research of Texture Evolution at excessive pressure premiums in FCC fabrics (pages 73–81): Nilesh Gurao, Satyam Suwas and Rajeev Kapoor
Chapter nine Texture and Microstructure improvement in Copper After Cryogenic Rolling and warmth remedy (pages 83–94): A. Haldar, D. Das and P.P. Chattopadhyay
Chapter 10 In?Situ EBSD research of the ????? section Transformation in a Microalloyed metal (pages 95–102): I. Lischewski, D.M. Kirch, A. Ziemons and G. Gottstein
Chapter eleven Texture alterations in the course of section differences Studied in situ With Neutron Diffraction (pages 103–113): Hans?Rudolf Wenk
Chapter 12 Three?Dimensional FIB?OIM of Ceramic fabrics (pages 117–124): Shen J. Dillon and Gregory S. Rohrer
Chapter thirteen comparability of X?Ray and EBSD Textures for Back?Annealed Al?Mg Alloys (pages 125–133): O. Engler
Chapter 14 a brand new technique for Quantification of Texture Uniformity of Plate (pages 135–146): Peter Jepson and Robert Bailey
Chapter 15 setting apart Coincident Electron Backscatter Diffraction styles close to Interfaces (pages 147–154): Josh Kacher, Brent L. Adams, David Fullwood and Colin Landon
Chapter sixteen swift Texture choice in line with Dimensional X Ray Detector (pages 155–162): Weimin Mao
Chapter 17 Semiautomatic choice of Orientations and Elastic pressure from Kossel Microdiffraction (pages 163–169): Adam Morawiec, Raphael Pesci and Jean?Sebastien Lecomte
Chapter 18 Statistically trustworthy EBSD research approach to Grain Boundary Characterization (pages 171–179): D.H. Kim, J.Y. Kang, D.I. Kim, E.K. Her, S.J. Kim, H.N. Han, K.M. Oh and H.C. Lee
Chapter 19 3D Microstructures and Textures of a aircraft pressure Compressed {110}<112> Al?0.3% Mn unmarried Crystal (pages 181–188): H. Paul, J.H. driving force and Cl. Maurice
Chapter 20 3 legislation of Substructure Anisotropy of Textured steel fabrics, printed by means of X?Ray approach to Generalized Pole Figures (pages 189–195): Yuriy Perlovich, Margarita Isaenkova and Vladimir Fesenko
Chapter 21 3D?Microstructural and Texture Characterization in several size Scales (pages 197–204): Roumen Petrov, Patricia Gobernado Hernandez, Orlando Leon Garcia, Hemant Sharma and Leo Kestens
Chapter 22 neighborhood Crystal Rotations of Bulk Grains via High?Resolution EBSD in the course of sizzling PSC of Al–0.1 % Mn Polycrystals (pages 205–212): Romain Quey, David Piot and Julian Driver
Chapter 23 Grain Boundary Orientations in a Fe?Mn?Cu Polycrystalline Alloy (pages 213–220): M. Takashima and P. Wynblatt
Chapter 24 improvement of a TEM?Based Orientation Microscopy process (pages 221–228): S. Zaefferer and G. Wu
Chapter 25 area keep an eye on impact on Voltage?Strain in BaTiO3 unmarried Crystal (pages 230–238): Yoshio Akimune, Kazuo Matsuo, Ryutaro Oishi and Akira Okada
Chapter 26 Tentative Simulation of Crystal Rotation for NaCl constructions (pages 239–248): Hiroaki Masui
Chapter 27 Grain Boundary styles in Dynamically Recrystallized Quartz Aggregates (pages 250–260): Cristiane Castro and Leonardo Lagoeiro
Chapter 28 The Correlation among Grain Boundary personality and lntergranular Corrosion Susceptibility of 2124 Aluminum Alloy (pages 261–267): L.H. Chan, H. Weiland, S. Cheong, G.S. Rohrer and A.D. Rollett
Chapter 29 Rodrigues?Frank areas for Misorientations and Orientation Relationships among Crystals of Any Crystallographic element teams (pages 269–280): Youliang He and John J. Jonas
Chapter 30 Origins of Texture reminiscence in Steels (pages 281–290): Bevis Hutchinson and Leo A.I. Kestens
Chapter 31 A Grain Boundary research of Cemented Tungsten Carbides utilizing OIM (pages 291–304): Vineet Kumar, Zhigang Zak Fang, S.I. Wright and M.M. Nowell
Chapter 32 The impact of Grain and part Boundary Misorientation on Nucleation in the course of Solid?state part alterations in a Co?l5Fe Alloy (pages 305–311): H. Landheer, S.E. Offerman, L.A.I. Kestens, T. Takeuchi, M. Enonioto and Y. Adachi
Chapter 33 Microstructural amendment in a 15Cr?15Ni?2.2 Mo?Ti converted Austenitic chrome steel via dual caused Grain Boundary Engineering (pages 313–321): Sumantra Mandal, P.V. Sivaprasad and V. Subramanya Sarma
Chapter 34 impression of pressure course and Annealing on improvement of Resistance to lntergranular Degradation in Austenitic Stainless Steels (pages 323–334): V. Randle, R. Jones, T.J. Marrow and D. Engelberg
Chapter 35 Evolution of the Grain Boundary personality Distribution in Strontium Titanate in the course of Grain progress (pages 335–342): Herbert M. Miller and Gregory S. Rohrer
Chapter 36 A version for the beginning of Anisotropic Grain Boundary personality Distributions in Polycrystalline fabrics (pages 343–353): Gregory S. Rohrer, Jason Gruber and Anthony D. Rollett
Chapter 37 Nucleation of the first Al part on TiAl3 in the course of Solidification of a Hot?Dip Zn?11%Al?3%Mg?0.2%Si Coating on metal Sheet (pages 355–362): Kazuhiko Honda, Kohsaku Ushioda and Wataru Yamada
Chapter 38 Textural Inhomogeneity influence through the Monte Carlo Simulation of the irregular Goss Grain progress in Fe?3%Si metal Grade HiB (pages 365–372): T. Baudin, R. Penelle and D. Ceccaldi
Chapter 39 warding off Roping and Ridging in AA6XXX Sheets: Characterizing the preliminary country (pages 373–380): T.A. Bennett, R.H. Petrov and L.A.I. Kestens
Chapter forty improvement of dice Texture in Cold?Rolled and Annealed Multilayer Tapes for covered Superconductor purposes (pages 381–390): P.P. Bhattacharjee and R.K. Ray
Chapter forty-one results of Elastic Modulus on Deformation and Recrystallization of excessive Purity Nb (pages 391–398): D. Baars, H. Jiang, T.R. Bieler, A. Zamirit, F. Pourboghrat and C. Compton
Chapter forty two Through?Process Texture Modelling of AA6016 from sizzling Rolling to ultimate Annealing (pages 399–408): C. Bollmann and G. Gottstein
Chapter forty three dice Texture because of Dynamic Recrystallization in Pb and Pb?62%Sn Alloys below equivalent Chanel Angular Extrusion Processing (pages 409–420): R.E. Bolmaro, V.L. Sordi, M. Ferrante, WeiMin Gan and H.?G. Brokmeier
Chapter forty four Annealing Texture Evolution (pages 421–428): I.L. Dillamore
Chapter forty five at the balance of Recrystallization Textures in Low Alloyed Zirconium Sheets (pages 429–436): Francois Gerspach, Nathalie Bozzolo and Francis Wagner
Chapter forty six An research of the feel and suggest Orientation of Aluminium Alloy AA5052 Subjected to ahead and opposite scorching Torsion and next Annealing (pages 437–444): O. Hernandez?Silva, B.P. Wynne and W.M. Rainforth
Chapter forty seven Evolution of {111} Recrystallization Texture in Al?Mg?Si Alloy Sheets Processed by means of Symmetric and uneven mixture Rolling (pages 445–452): Hirofumi Inoue, Satoshi Kobayashi, Masayuki Hori, Toshio Komatsubara and Takayuki Takasugi
Chapter forty eight influence of exterior Constraint and Deviation from perfect Orientation on improvement of Rolling Texture in natural Aluminum unmarried Crystal Having {100} <001> Orientation (pages 453–460): Keizo Kashihara and Hirosuke Inagaki
Chapter forty nine Nucleation and development of latest Grains in Deformed Quartz unmarried Crystals (pages 461–468): Leonardo Lagoeiro and Paola Barbosa
Chapter 50 Rolling and Annealing Textures of Silver Sheets (pages 469–480): Dong Nyung Lee, Heung Nam Han and Se?Jong Kim
Chapter fifty one functionality of Layer Thickness at the Microstructural Evolution in Copper of Annealed Roll?Bonded CuNb Composites (pages 481–488): S.C.V. Lim and A.D. Rollett
Chapter fifty two impression of Taylor issue M on Recrystallization of The dice and Cube?Family Grains in FCC steel (pages 489–498): Hiroaki Masui
Chapter fifty three Multi?Cycle Pinch Welding of 304L Tubes: Inhomogeneities in Deformation and Recrystallization Textures and Microstructures (pages 499–506): C.T. Necker, A.N. Marchi and M.G. Smith
Chapter fifty four impression of Mg focus on Texture Formation in Al?Mg Alloys in the course of extreme temperature Compression (pages 507–513): Kazuto Okayasu, Hiroki Takekoshi, Masayuki Sakakibara and Hiroshi Fukutomi
Chapter fifty five Ultra?Fine Grain Austenitic Stainless Steels: effect of Texture in the course of Recrystallization (pages 515–522): Angeline Poulon?Quintin, Stephanie Brochet, Jean?Bernard Vogt, Jean?Christophe Glez and Jean?Denis Mithieux
Chapter fifty six styles of Deformation and linked Recrystallization in Warm/Hot Deformed AA6022 (pages 523–528): S. Raveendra, S. Mishra, H. Weiland and that i. Samajdar
Chapter fifty seven reviews on Texture and Microstructure of Cryorolled and Annealed Cu?5%Al, Cu?5%Zn Alloys (pages 529–536): V.L. Niranjani, Nilesh Gurao, U. Wendt, S. Suwas and V. Subramanya Sarma
Chapter fifty eight Modeling of Texture improvement in the course of Tandem sizzling Rolling of AA3103 (pages 537–545): C. Schafer, V. Mohles and G. Gottstein
Chapter fifty nine Texture amendment in Asymmetrically Rolled Aluminum Sheets (pages 547–554): Jurij Sidor, Roumen Petrov, Alexis Miroux and Leo Kestens
Chapter 60 In?Situ SEM/EBSP research in the course of Annealing in Al?Mg Alloys (pages 555–560): Yoshimasa Takayama, Kazuhiro Morita, Hajime Kato and Yoshimasa Ookubo
Chapter sixty one orientated Grain progress and the impact of In Situ Annealing on Texture in AlMn Alloys (pages 561–568): Caterina E. Tommaseo and H. Klein
Chapter sixty two Subgrain Coarsening of Hot?Rolled AA5005 Aluminum Alloy: A comparability among EBSD Observations and Monte Carlo (pages 569–576): Shengyu Wang, Mohammed H. Alvi and Anthony D. Rollett
Chapter sixty three effect of Low attitude Grain limitations on Recrystallization (pages 577–584): Myrjam profitable and Dierk Raabe
Chapter sixty four comparability of Calcite Crystallographic Texture within the Shells of the Rhynchonelliform Brachiopod, Terebratulina Retusa and the Bivalve Mollusc, Mytilus Edulis (pages 586–593): M. Cusack, A. Perez?Huerta, P. Dalbeck, P. Chung and M.R. Lee
Chapter sixty five put on Resistance and Texture Evolution of extremely excessive Molecular Weight Polyethylenes in the course of Uniaxial Compression (pages 595–603): D.S. Li, H. Garmestani, S.C. Davis, L.K. Moss, A.K. Siddiqi, J.B. Guthrie, N. Johansen and L. Matrisciano
Chapter sixty six Texture and Microstructure of recent Rhynchonellide Brachiopod Shells—An Ontogenetic research (pages 605–617): E. Griesshaber, R.D. more moderen, U. model and W.W. Schmahl
Chapter sixty seven Peering Into the Eyes of Trilobites utilizing EBSD (pages 619–626): C. Torney, M.R. Lee and A.W. Owen
Chapter sixty eight Texture and Anisotropy of MP35N cord for behavior Leads (pages 627–635): Bernard Q. Li and Tom Steigauf
Chapter sixty nine Crystallographic Textures from the Exoskeleton of the Lobster Homarus Americanus and Calculation of the Mechanical houses of the Calcite part (pages 637–654): L. Raue, H. Klein, D. Raabe and H. Fabritius
Chapter 70 Experimental Characterization of the influence of Crystallography at the 3 Dimensional Nucleation and progress of Fatigue Cracks in Metals (pages 656–668): J?Y Buffiere, E. Ferrie, H. Proudhon and W. Ludwig
Chapter seventy one Reversible Texture Transition in the course of Accumulative Roll Bonding (pages 669–680): Naoya Kamikawa, Xiaoxu Huang, Grethe Winther, Nobuhiro Tsuji and Niels Hansen
Chapter seventy two Evolution of Grain Boundary Microstructures in Molybdenum through Thermomechanical Processing from unmarried Crystals (pages 681–692): Shigeaki Kobayashi, Sadahiro Tsurekawa and Tadao Watanabe
Chapter seventy three neighborhood Characterization of Void Initiation on IF metal via FIB?EBSD process (pages 693–700): Orlando Leon?Garcia, Roumen Petrov and Leo Kestens
Chapter seventy four Experimental and Simulation learn on Texture and Bendability of AA5XXX Aluminum Alloys (pages 701–708): Y. Liu, Z. lengthy, X.Y. Wen, S. Ningileri and S.K. Das
Chapter seventy five a few facets on Grain progress in ECAP Deformed and warmth handled Aluminum 1.2% Hafnium Alloy (pages 709–716): O. Al?Buhamad, M.Z. Quadir and M. Ferry
Chapter seventy six Kinetic Measurements of Texture and Microstructural Evolution utilizing Orientation Distribution functionality and Residual pressure rest (pages 717–723): S. Saimoto, J. Cooley and C. Gabryel
Chapter seventy seven Texture and Micro?Hardness Evolution of Submicrograined Copper (pages 725–731): X.S. Yao, Y.D. Liu, Q.W. Jiang, X. Zhao and that i. Zuo
Chapter seventy eight A version of Plastic Spin considering Grain interplay in the course of Rolling (pages 734–744): A. Fourty, J.W. Signorelli and R.E. Bolmaro
Chapter seventy nine CPFEM research of the influence of Grain form at the Planar Anisotropy and the Shear Banding of Textured steel Sheets (pages 745–756): Laurent Delannay, Maxime A. Melchior, Anand okay. Kanjarla, Paul Van Houtte and Javier W. Signorelli
Chapter eighty Modelling of fundamental Recrystallization utilizing electronic Microstructures (pages 757–769): R.E. Loge, M. Bernacki, H. Resk, H. Digonnet, Y. Chastel and T. Coupez
Chapter eighty one Two?Phase Microstructure iteration in 3D in keeping with second Sections of a Nickel Alloy (pages 771–778): C.G. Roberts, S.L. Semiatin and A.D. Rollett
Chapter eighty two Evolution of neighborhood harm Variable and Its fee of Strain?Softening fabric in pressure in response to Nonlocal idea (pages 779–786): X.B. Wang
Chapter eighty three Grain interplay and comparable Elastic Fields at Triple Junction in Low Deformed IF metal: Micromechanical version and Reconstruction from EBSD Orientation info (pages 787–801): A.A. Zisman, V.V. Rybin, M. Seefeldt, S. Van Boxel and P. Van Houtte
Chapter eighty four Gradient Matrix technique to picture Crystal Curvature with Discrete Orientation info: Case examine of Triple Junction in Deformed IF metal (pages 803–814): A.A. Zisman, M. Seefeldt, S. Van Boxel and P. Van Houtte

Show description

ISBN-10: 0470408359

ISBN-13: 9780470408353

ISBN-10: 0470444215

ISBN-13: 9780470444214

This quantity comprises papers offered on the fifteenth overseas convention at the Texture of fabrics from June 1-5th, 2008 in Pittsburgh, PA. Chapters contain:

  • Thin movies
  • Texture at Non-Ambient stipulations
  • Novel Texture dimension ideas together with 3D
  • Complex Oxides
  • Interface Textures
  • Recrystallization Texture
  • Biomaterials
  • Texture results on harm Accumulation
  • Digital Microstructures

View info on Materials Processing and Texture: Ceramic Transactions, quantity 200.Content:
Chapter 1 the feel of skinny NiSi motion pictures and Its impact on Agglomeration (pages 1–9): ok. De Keyser, C. Detavernier, R. L. Van Meirhaeghe, J. Jordan?Sweet and C. Lavoie
Chapter 2 Epitaxial Substrates from Ni?Based Ternary Alloys with Cr and W (pages 11–22): D.P. Rodionov, I.V. Gervasyeva, Yu.V. Khlebnikova and V.A. Kazantsev
Chapter three dice Texture Formation in Ni?Pd and Ni?Pd?W Alloys for HTS Tapes (pages 23–34): I.V. Gervasyeva, D.P. Rodionov, Yu.V. Khlebnikova, G.A. Dosovitskii and A.R. Kaul
Chapter four Texture of quickly Solidified Cu skinny movies Studied via SEM EBSD and TEM (pages 35–45): R. Zhong, A. Kulovits, J.M.K. Wiezorek and J.P. Leonard
Chapter five regulate of Texture in Polycrystalline skinny movies Used as facts garage Media (pages 47–56): David E. Laughlin, Hua Yuan, En Yang and Chun Wang
Chapter 6 impacts of Processing Parameters on Microstructures and Microtextures of Au turn Chip Bonds in the course of Microelectronics Packaging (pages 57–62): P Yang, C?M Li, D?M Liu, M Hung, M Li and W?M Mao
Chapter 7 In Situ statement of Texture Evolution in Ti?10?2?3 (pages 65–72): Seema L. Raghunathan, Richard Dashwood, Martin Jackson, Sven Vogel and David Dye
Chapter eight research of Texture Evolution at excessive pressure premiums in FCC fabrics (pages 73–81): Nilesh Gurao, Satyam Suwas and Rajeev Kapoor
Chapter nine Texture and Microstructure improvement in Copper After Cryogenic Rolling and warmth remedy (pages 83–94): A. Haldar, D. Das and P.P. Chattopadhyay
Chapter 10 In?Situ EBSD research of the ????? section Transformation in a Microalloyed metal (pages 95–102): I. Lischewski, D.M. Kirch, A. Ziemons and G. Gottstein
Chapter eleven Texture alterations in the course of section differences Studied in situ With Neutron Diffraction (pages 103–113): Hans?Rudolf Wenk
Chapter 12 Three?Dimensional FIB?OIM of Ceramic fabrics (pages 117–124): Shen J. Dillon and Gregory S. Rohrer
Chapter thirteen comparability of X?Ray and EBSD Textures for Back?Annealed Al?Mg Alloys (pages 125–133): O. Engler
Chapter 14 a brand new technique for Quantification of Texture Uniformity of Plate (pages 135–146): Peter Jepson and Robert Bailey
Chapter 15 setting apart Coincident Electron Backscatter Diffraction styles close to Interfaces (pages 147–154): Josh Kacher, Brent L. Adams, David Fullwood and Colin Landon
Chapter sixteen swift Texture choice in line with Dimensional X Ray Detector (pages 155–162): Weimin Mao
Chapter 17 Semiautomatic choice of Orientations and Elastic pressure from Kossel Microdiffraction (pages 163–169): Adam Morawiec, Raphael Pesci and Jean?Sebastien Lecomte
Chapter 18 Statistically trustworthy EBSD research approach to Grain Boundary Characterization (pages 171–179): D.H. Kim, J.Y. Kang, D.I. Kim, E.K. Her, S.J. Kim, H.N. Han, K.M. Oh and H.C. Lee
Chapter 19 3D Microstructures and Textures of a aircraft pressure Compressed {110}<112> Al?0.3% Mn unmarried Crystal (pages 181–188): H. Paul, J.H. driving force and Cl. Maurice
Chapter 20 3 legislation of Substructure Anisotropy of Textured steel fabrics, printed by means of X?Ray approach to Generalized Pole Figures (pages 189–195): Yuriy Perlovich, Margarita Isaenkova and Vladimir Fesenko
Chapter 21 3D?Microstructural and Texture Characterization in several size Scales (pages 197–204): Roumen Petrov, Patricia Gobernado Hernandez, Orlando Leon Garcia, Hemant Sharma and Leo Kestens
Chapter 22 neighborhood Crystal Rotations of Bulk Grains via High?Resolution EBSD in the course of sizzling PSC of Al–0.1 % Mn Polycrystals (pages 205–212): Romain Quey, David Piot and Julian Driver
Chapter 23 Grain Boundary Orientations in a Fe?Mn?Cu Polycrystalline Alloy (pages 213–220): M. Takashima and P. Wynblatt
Chapter 24 improvement of a TEM?Based Orientation Microscopy process (pages 221–228): S. Zaefferer and G. Wu
Chapter 25 area keep an eye on impact on Voltage?Strain in BaTiO3 unmarried Crystal (pages 230–238): Yoshio Akimune, Kazuo Matsuo, Ryutaro Oishi and Akira Okada
Chapter 26 Tentative Simulation of Crystal Rotation for NaCl constructions (pages 239–248): Hiroaki Masui
Chapter 27 Grain Boundary styles in Dynamically Recrystallized Quartz Aggregates (pages 250–260): Cristiane Castro and Leonardo Lagoeiro
Chapter 28 The Correlation among Grain Boundary personality and lntergranular Corrosion Susceptibility of 2124 Aluminum Alloy (pages 261–267): L.H. Chan, H. Weiland, S. Cheong, G.S. Rohrer and A.D. Rollett
Chapter 29 Rodrigues?Frank areas for Misorientations and Orientation Relationships among Crystals of Any Crystallographic element teams (pages 269–280): Youliang He and John J. Jonas
Chapter 30 Origins of Texture reminiscence in Steels (pages 281–290): Bevis Hutchinson and Leo A.I. Kestens
Chapter 31 A Grain Boundary research of Cemented Tungsten Carbides utilizing OIM (pages 291–304): Vineet Kumar, Zhigang Zak Fang, S.I. Wright and M.M. Nowell
Chapter 32 The impact of Grain and part Boundary Misorientation on Nucleation in the course of Solid?state part alterations in a Co?l5Fe Alloy (pages 305–311): H. Landheer, S.E. Offerman, L.A.I. Kestens, T. Takeuchi, M. Enonioto and Y. Adachi
Chapter 33 Microstructural amendment in a 15Cr?15Ni?2.2 Mo?Ti converted Austenitic chrome steel via dual caused Grain Boundary Engineering (pages 313–321): Sumantra Mandal, P.V. Sivaprasad and V. Subramanya Sarma
Chapter 34 impression of pressure course and Annealing on improvement of Resistance to lntergranular Degradation in Austenitic Stainless Steels (pages 323–334): V. Randle, R. Jones, T.J. Marrow and D. Engelberg
Chapter 35 Evolution of the Grain Boundary personality Distribution in Strontium Titanate in the course of Grain progress (pages 335–342): Herbert M. Miller and Gregory S. Rohrer
Chapter 36 A version for the beginning of Anisotropic Grain Boundary personality Distributions in Polycrystalline fabrics (pages 343–353): Gregory S. Rohrer, Jason Gruber and Anthony D. Rollett
Chapter 37 Nucleation of the first Al part on TiAl3 in the course of Solidification of a Hot?Dip Zn?11%Al?3%Mg?0.2%Si Coating on metal Sheet (pages 355–362): Kazuhiko Honda, Kohsaku Ushioda and Wataru Yamada
Chapter 38 Textural Inhomogeneity influence through the Monte Carlo Simulation of the irregular Goss Grain progress in Fe?3%Si metal Grade HiB (pages 365–372): T. Baudin, R. Penelle and D. Ceccaldi
Chapter 39 warding off Roping and Ridging in AA6XXX Sheets: Characterizing the preliminary country (pages 373–380): T.A. Bennett, R.H. Petrov and L.A.I. Kestens
Chapter forty improvement of dice Texture in Cold?Rolled and Annealed Multilayer Tapes for covered Superconductor purposes (pages 381–390): P.P. Bhattacharjee and R.K. Ray
Chapter forty-one results of Elastic Modulus on Deformation and Recrystallization of excessive Purity Nb (pages 391–398): D. Baars, H. Jiang, T.R. Bieler, A. Zamirit, F. Pourboghrat and C. Compton
Chapter forty two Through?Process Texture Modelling of AA6016 from sizzling Rolling to ultimate Annealing (pages 399–408): C. Bollmann and G. Gottstein
Chapter forty three dice Texture because of Dynamic Recrystallization in Pb and Pb?62%Sn Alloys below equivalent Chanel Angular Extrusion Processing (pages 409–420): R.E. Bolmaro, V.L. Sordi, M. Ferrante, WeiMin Gan and H.?G. Brokmeier
Chapter forty four Annealing Texture Evolution (pages 421–428): I.L. Dillamore
Chapter forty five at the balance of Recrystallization Textures in Low Alloyed Zirconium Sheets (pages 429–436): Francois Gerspach, Nathalie Bozzolo and Francis Wagner
Chapter forty six An research of the feel and suggest Orientation of Aluminium Alloy AA5052 Subjected to ahead and opposite scorching Torsion and next Annealing (pages 437–444): O. Hernandez?Silva, B.P. Wynne and W.M. Rainforth
Chapter forty seven Evolution of {111} Recrystallization Texture in Al?Mg?Si Alloy Sheets Processed by means of Symmetric and uneven mixture Rolling (pages 445–452): Hirofumi Inoue, Satoshi Kobayashi, Masayuki Hori, Toshio Komatsubara and Takayuki Takasugi
Chapter forty eight influence of exterior Constraint and Deviation from perfect Orientation on improvement of Rolling Texture in natural Aluminum unmarried Crystal Having {100} <001> Orientation (pages 453–460): Keizo Kashihara and Hirosuke Inagaki
Chapter forty nine Nucleation and development of latest Grains in Deformed Quartz unmarried Crystals (pages 461–468): Leonardo Lagoeiro and Paola Barbosa
Chapter 50 Rolling and Annealing Textures of Silver Sheets (pages 469–480): Dong Nyung Lee, Heung Nam Han and Se?Jong Kim
Chapter fifty one functionality of Layer Thickness at the Microstructural Evolution in Copper of Annealed Roll?Bonded CuNb Composites (pages 481–488): S.C.V. Lim and A.D. Rollett
Chapter fifty two impression of Taylor issue M on Recrystallization of The dice and Cube?Family Grains in FCC steel (pages 489–498): Hiroaki Masui
Chapter fifty three Multi?Cycle Pinch Welding of 304L Tubes: Inhomogeneities in Deformation and Recrystallization Textures and Microstructures (pages 499–506): C.T. Necker, A.N. Marchi and M.G. Smith
Chapter fifty four impression of Mg focus on Texture Formation in Al?Mg Alloys in the course of extreme temperature Compression (pages 507–513): Kazuto Okayasu, Hiroki Takekoshi, Masayuki Sakakibara and Hiroshi Fukutomi
Chapter fifty five Ultra?Fine Grain Austenitic Stainless Steels: effect of Texture in the course of Recrystallization (pages 515–522): Angeline Poulon?Quintin, Stephanie Brochet, Jean?Bernard Vogt, Jean?Christophe Glez and Jean?Denis Mithieux
Chapter fifty six styles of Deformation and linked Recrystallization in Warm/Hot Deformed AA6022 (pages 523–528): S. Raveendra, S. Mishra, H. Weiland and that i. Samajdar
Chapter fifty seven reviews on Texture and Microstructure of Cryorolled and Annealed Cu?5%Al, Cu?5%Zn Alloys (pages 529–536): V.L. Niranjani, Nilesh Gurao, U. Wendt, S. Suwas and V. Subramanya Sarma
Chapter fifty eight Modeling of Texture improvement in the course of Tandem sizzling Rolling of AA3103 (pages 537–545): C. Schafer, V. Mohles and G. Gottstein
Chapter fifty nine Texture amendment in Asymmetrically Rolled Aluminum Sheets (pages 547–554): Jurij Sidor, Roumen Petrov, Alexis Miroux and Leo Kestens
Chapter 60 In?Situ SEM/EBSP research in the course of Annealing in Al?Mg Alloys (pages 555–560): Yoshimasa Takayama, Kazuhiro Morita, Hajime Kato and Yoshimasa Ookubo
Chapter sixty one orientated Grain progress and the impact of In Situ Annealing on Texture in AlMn Alloys (pages 561–568): Caterina E. Tommaseo and H. Klein
Chapter sixty two Subgrain Coarsening of Hot?Rolled AA5005 Aluminum Alloy: A comparability among EBSD Observations and Monte Carlo (pages 569–576): Shengyu Wang, Mohammed H. Alvi and Anthony D. Rollett
Chapter sixty three effect of Low attitude Grain limitations on Recrystallization (pages 577–584): Myrjam profitable and Dierk Raabe
Chapter sixty four comparability of Calcite Crystallographic Texture within the Shells of the Rhynchonelliform Brachiopod, Terebratulina Retusa and the Bivalve Mollusc, Mytilus Edulis (pages 586–593): M. Cusack, A. Perez?Huerta, P. Dalbeck, P. Chung and M.R. Lee
Chapter sixty five put on Resistance and Texture Evolution of extremely excessive Molecular Weight Polyethylenes in the course of Uniaxial Compression (pages 595–603): D.S. Li, H. Garmestani, S.C. Davis, L.K. Moss, A.K. Siddiqi, J.B. Guthrie, N. Johansen and L. Matrisciano
Chapter sixty six Texture and Microstructure of recent Rhynchonellide Brachiopod Shells—An Ontogenetic research (pages 605–617): E. Griesshaber, R.D. more moderen, U. model and W.W. Schmahl
Chapter sixty seven Peering Into the Eyes of Trilobites utilizing EBSD (pages 619–626): C. Torney, M.R. Lee and A.W. Owen
Chapter sixty eight Texture and Anisotropy of MP35N cord for behavior Leads (pages 627–635): Bernard Q. Li and Tom Steigauf
Chapter sixty nine Crystallographic Textures from the Exoskeleton of the Lobster Homarus Americanus and Calculation of the Mechanical houses of the Calcite part (pages 637–654): L. Raue, H. Klein, D. Raabe and H. Fabritius
Chapter 70 Experimental Characterization of the influence of Crystallography at the 3 Dimensional Nucleation and progress of Fatigue Cracks in Metals (pages 656–668): J?Y Buffiere, E. Ferrie, H. Proudhon and W. Ludwig
Chapter seventy one Reversible Texture Transition in the course of Accumulative Roll Bonding (pages 669–680): Naoya Kamikawa, Xiaoxu Huang, Grethe Winther, Nobuhiro Tsuji and Niels Hansen
Chapter seventy two Evolution of Grain Boundary Microstructures in Molybdenum through Thermomechanical Processing from unmarried Crystals (pages 681–692): Shigeaki Kobayashi, Sadahiro Tsurekawa and Tadao Watanabe
Chapter seventy three neighborhood Characterization of Void Initiation on IF metal via FIB?EBSD process (pages 693–700): Orlando Leon?Garcia, Roumen Petrov and Leo Kestens
Chapter seventy four Experimental and Simulation learn on Texture and Bendability of AA5XXX Aluminum Alloys (pages 701–708): Y. Liu, Z. lengthy, X.Y. Wen, S. Ningileri and S.K. Das
Chapter seventy five a few facets on Grain progress in ECAP Deformed and warmth handled Aluminum 1.2% Hafnium Alloy (pages 709–716): O. Al?Buhamad, M.Z. Quadir and M. Ferry
Chapter seventy six Kinetic Measurements of Texture and Microstructural Evolution utilizing Orientation Distribution functionality and Residual pressure rest (pages 717–723): S. Saimoto, J. Cooley and C. Gabryel
Chapter seventy seven Texture and Micro?Hardness Evolution of Submicrograined Copper (pages 725–731): X.S. Yao, Y.D. Liu, Q.W. Jiang, X. Zhao and that i. Zuo
Chapter seventy eight A version of Plastic Spin considering Grain interplay in the course of Rolling (pages 734–744): A. Fourty, J.W. Signorelli and R.E. Bolmaro
Chapter seventy nine CPFEM research of the influence of Grain form at the Planar Anisotropy and the Shear Banding of Textured steel Sheets (pages 745–756): Laurent Delannay, Maxime A. Melchior, Anand okay. Kanjarla, Paul Van Houtte and Javier W. Signorelli
Chapter eighty Modelling of fundamental Recrystallization utilizing electronic Microstructures (pages 757–769): R.E. Loge, M. Bernacki, H. Resk, H. Digonnet, Y. Chastel and T. Coupez
Chapter eighty one Two?Phase Microstructure iteration in 3D in keeping with second Sections of a Nickel Alloy (pages 771–778): C.G. Roberts, S.L. Semiatin and A.D. Rollett
Chapter eighty two Evolution of neighborhood harm Variable and Its fee of Strain?Softening fabric in pressure in response to Nonlocal idea (pages 779–786): X.B. Wang
Chapter eighty three Grain interplay and comparable Elastic Fields at Triple Junction in Low Deformed IF metal: Micromechanical version and Reconstruction from EBSD Orientation info (pages 787–801): A.A. Zisman, V.V. Rybin, M. Seefeldt, S. Van Boxel and P. Van Houtte
Chapter eighty four Gradient Matrix technique to picture Crystal Curvature with Discrete Orientation info: Case examine of Triple Junction in Deformed IF metal (pages 803–814): A.A. Zisman, M. Seefeldt, S. Van Boxel and P. Van Houtte

Show description

Read Online or Download Applications of Texture Analysis PDF

Best nanostructures books

Get Corrosion Control Through Organic Coatings (Corrosion PDF

Selecting the main appropriate coatings for buildings akin to bridges and construction helps can expand the carrier lifetime of that constitution considerably. Corrosion keep an eye on via natural Coatings discusses crucial variables within the trying out, choice, and alertness of industrial quality, natural corrosion-protection paints.

New PDF release: Semiconductor Nanostructures for Optoelectronic Devices:

This ebook offers the fabrication of optoelectronic nanodevices. The constructions thought of are nanowires, nanorods, hybrid semiconductor nanostructures, large bandgap nanostructures for noticeable gentle emitters and graphene. The gadget functions of those constructions are commonly defined. The e-book offers additionally with the characterization of semiconductor nanostructures.

Read e-book online The Finite Element Method in Thermomechanics PDF

The swift advances within the nuclear and aerospace applied sciences long ago twenty years compounded with the expanding calls for for top functionality, energy-efficient strength plant parts and engines have made trustworthy thermal rigidity research a serious consider the layout and operation of such apparatus.

Near-infrared nanomaterials: preparation, bioimaging and by Fan Zhang, Paul O'Brien, Dai-Wen Pang, Zhenhui Kang, Jie PDF

Within the final decade, bioimaging and remedy in keeping with near-infrared (NIR) nanomaterials have performed a tremendous position in biotechnology as a result of their intrinsic benefits compared to the normal imaging probe and drugs. NIR nanomaterials let deeper penetration intensity, low detection threshold focus and higher specified functionality.

Extra resources for Applications of Texture Analysis

Sample text

B) - 2 (NiwuhCr7nW26) and (c) - 3 Win9 zCr7 2w3 6 ) . 20 . Applications of Texture Analysis Epitaxial Substrates from Ni-Based Ternary Alloys with Cr and W It should be noted that the concentration boundaries upon alloying nickel, which control the possibility to gain a sharp cube texture, are not strict and may depend, for instance. on the purity of starting materials in the alloy. 92%) was used and already the NiRq 2Cr7 2w)6 alloy exhibited not very good cube texture. The authors' report on the sharp cube texture produced i n the alloy with a higher tungsten concentration - Ni&rRW+ Evidently, it is provided by a higher purity of the starting nickel.

G. Figures 2 and 4)by TEM. 0 pm into the pool. During the lateral advance of the solidification front the width of some grains increases at the expense of others, which are occluded (Figure 2). Zone IT Columnar growth: This region. 5 pm in the current films, is characterized by growth of long ribbon-like structures of mean uniform width of about 1 pm. In this region occlusion has ceased to a large extent. g. Figure 8d). Texture analysis by EBSD and electron diffraction in the TEM shows the presence of a cube texture.

H. Warlimont eds. (1985). S. V. M. B. Yakovlev, Physics of Metals and Metallography 87, 221 (1999). M. Copley, D. Beck, 0. Esquivel and M. Bass, AIP Conf. Proc. 50. 161 (1978). [36]T. N. Afonso. Appl. Phys. A 62, 513 (1996). Applications of Texture Analysis . 45 Applications of Texture Analysis: Ceramic Transactions,Volume 201. Edited by A. D. Rollett Copyright © 2009 The American Ceramic Society.

Download PDF sample

Applications of Texture Analysis


by Charles
4.3

Rated 4.17 of 5 – based on 50 votes